Model Is YPS1575A-1 Rendering Pre-Crusher Rendering Plant Crusher
1,Crusher is used for crushing the whole animal carcasses, and various internal organs and bones from slaughterhouses.
2,Generally use crusher to reduce the size of the material and then delivery by screw conveyor or vane pump before cooking.
3,The motor model and the speed of the crushing shaft can be adjusted according to the production demand, the operation cost is low.
Classification
The hammer crusher is divided into: single-stage hammer crusher, high-efficiency hammer crusher, sand blower, vertical shaft hammer crusher, reversible hammer crusher, ring hammer crusher. The hammer head of the hammer crusher is replaced by a ring coal crusher with a steel ring. The ring coal crusher is a variant of the hammer crusher. It uses the combined effect of high-speed impact and low-speed rolling to crush materials, so that finer products can be obtained. It is mainly used to crush coal for power plants, but it can also be used to crush gypsum, salt chemical raw materials and some medium-hard materials.
1. The crushed materials are coal, salt, white Asia, gypsum, bricks, limestone, etc. Hammer crushers. 1. According to the number of rotors, it is divided into two types: single rotor and double rotor.
2. According to the rotation direction of the rotor, it can be divided into two types: irreversible and reversible.
3. According to the arrangement of the hammers, it is divided into two types: single-row and multi-row. The former hammers are installed on the same rotating plane, while the latter hammers are distributed on several rotating planes. Main purposeedit The crushed materials are coal, salt, chalk, gypsum, bricks, limestone, etc. It is also used to crush wood, paper or crushed asbestos cement with strong fiber structure, elasticity and toughness to recycle asbestos fibers. In addition, the hammer crusher can not only be used in crushing production lines, sand production lines, but also in the beneficiation production line instead of cone crushers.
Jiangsu Senrong's pre-crusher is very durable and has an ultra-high-strength cemented carbide welded on each fracture surface. This alloy can effectively cut off the metal impurities mixed in the material. The pre-crusher breaks the incoming material into particles of no more than 48 mm, and particles of this size will save a lot of time for subsequent cooking or decomposition processes. The pre-crusher is equipped with a speed sensor. Once a large metal foreign object is encountered, the configured sensor will automatically shut down the motor to protect the device.
| name | rendering pre-crusher |
| model | YPS1575A-1 |
| motor brand | 75kw |
| motor brand | Simens |
Product Tags:
|
|
Rustproof 10t/H 37kw Animal Bone Crushing Plant Images
|
